CRIMPING & STRIPPING

PRODUCTS

MULTI-PURPOSE WIRE PLIERS

PA-01 (245mm)

PA-03 (210mm)

ENGINEER PA-01
ENGINEER PA-01

Multi-purpose Wire Pliers (245mm) General purpose & compact wire pliers used for crimping, stripping, cutting and precision wiring work. 6-in-1 multipurpose type. For bare, insulated terminals & splices (open barrels).

ENGINEER PA-01
ENGINEER PA-01

ENGINEER PA-03
ENGINEER PA-03

Multi-purpose Wire Pliers (210mm) For crimping splices (open barrel terminals), stripping wire, cutting wire and cutting screws.

ENGINEER PA-01
ENGINEER PA-01

Multi-purpose Wire Pliers (245mm) General purpose & compact wire pliers used for crimping, stripping, cutting and precision wiring work. 6-in-1 multipurpose type. For bare, insulated terminals & splices (open barrels).

1/3

CONNECTOR CRIMPING PLIERS

PA-09 (175mm)

ENGINEER PA-09
ENGINEER PA-09

Universal Crimping Pliers (175mm) Crimp AWG #28~#18 wires in micro connectors of different makers. Four different crimping dies: 1.6, 1.9, 2.0 & 2.3mm. Precise and perfect crimp finish. Durable high carbon steel pliers with locking latch and coiled spring.

ENGINEER PA-09
ENGINEER PA-09

Four different crimping dies: 1.0, 1.4, 1.6 & 1.9mm.

ENGINEER PA-21
ENGINEER PA-21

Four different crimping dies: 1.6, 1.9, 2.2 & 2.5mm.

ENGINEER PA-09
ENGINEER PA-09

Universal Crimping Pliers (175mm) Crimp AWG #28~#18 wires in micro connectors of different makers. Four different crimping dies: 1.6, 1.9, 2.0 & 2.3mm. Precise and perfect crimp finish. Durable high carbon steel pliers with locking latch and coiled spring.

1/6

PA-20 (175mm)

PA-21 (175mm)

INTERCHANGEABLE CRIMPING PLIERS

PAD-11 (175mm)

PAD-12 (175mm)

ENGINEER PAD-11
ENGINEER PAD-11

Interchangeable Crimper (175mm) Size: Small. Interchangeable diet set for open-barrel contacts. Easy replacement and perfect fitting to tool frame. Ergonomically-designed handles with strap hole. Equipped with wire stripper and cutter. Spring-loaded. Standard accessory: hex key wrench 2.5mm.

ENGINEER PAD-12
ENGINEER PAD-12

Interchangeable Crimper (175mm) Size: Medium. Interchangeable diet set for open-barrel contacts. Easy replacement and perfect fitting to tool frame. Ergonomically-designed handles with strap hole. Equipped with wire stripper and cutter. Spring-loaded. Standard accessory: hex key wrench 2.5mm.

ENGINEER PAD-13S
ENGINEER PAD-13S

Interchangeable Die Set. Size: Large. Die width: 2.5, 2.8, 3.1, 3.4, 3.7mm.

ENGINEER PAD-11
ENGINEER PAD-11

Interchangeable Crimper (175mm) Size: Small. Interchangeable diet set for open-barrel contacts. Easy replacement and perfect fitting to tool frame. Ergonomically-designed handles with strap hole. Equipped with wire stripper and cutter. Spring-loaded. Standard accessory: hex key wrench 2.5mm.

1/8

PAD-13 (175mm)

PAD-11S (S)

PAD-12S (M)

PAD-13S (L)

HANDY CRIMP TOOL COMPLETE SET

PAD-02 (KIT)

ENGINEER PAD-02
ENGINEER PAD-02

Precision Crimping Complete Tool Kit. Comes with three different interchangeable die sets, tool frame & connectable parts box (6 pcs) in a stylish carrying case.

ENGINEER PAD-02
ENGINEER PAD-02

Connectable parts box.

ENGINEER PAD-02
ENGINEER PAD-02

Stylish carry case (HDPE).

ENGINEER PAD-02
ENGINEER PAD-02

Precision Crimping Complete Tool Kit. Comes with three different interchangeable die sets, tool frame & connectable parts box (6 pcs) in a stylish carrying case.

1/3

WIRE STRIPPER FOR FLAT CABLES

PA-30 (FOR FLAT CABLES)

ENGINEER PA-30
ENGINEER PA-30

Wire Stripper for flat cables. One squeeze operation for easy stripping of applicable flat cables, maximum 12mm width. With slider stopper for adjustment of stripping length, 2~20mm. Adjustable screw to hold wire tightly or softly. Applicable sectional area: AWG20~10.

ENGINEER PA-30
ENGINEER PA-30

ENGINEER PA-30
ENGINEER PA-30

Wire Stripper for flat cables. One squeeze operation for easy stripping of applicable flat cables, maximum 12mm width. With slider stopper for adjustment of stripping length, 2~20mm. Adjustable screw to hold wire tightly or softly. Applicable sectional area: AWG20~10.

1/2

PRECISE WIRE STRIPPER

PA-05 (210mm)

ENGINEER PA-05
ENGINEER PA-05

Wire Stripper with Crimping Function (210mm). Stripper's hole diameter with AWG conversion: 0.4, 0.5, 0.65, 0.8, 0.95, 1.15, 1.45mm. Crimping function: bare terminal (0.5~2.0mm²) & connector terminal (0.3~1.25mm²). Engineer's joint-screw prevents joint from being loose and easy maintenance. Environment-friendly elastomer handles give soft-touch grip.

ENGINEER PA-06
ENGINEER PA-06

Wire Stripper (175mm). Stripper's hole diameter with AWG conversion: 0.4, 0.5, 0.65, 0.8, 0.95, 1.15, 1.45mm. Engineer's joint-screw prevents joint from being loose and easy maintenance. Environment-friendly elastomer handles give soft-touch grip.

ENGINEER PA-05
ENGINEER PA-05

Round finish of wires after stripping by sharp and precise edge.

ENGINEER PA-05
ENGINEER PA-05

Wire Stripper with Crimping Function (210mm). Stripper's hole diameter with AWG conversion: 0.4, 0.5, 0.65, 0.8, 0.95, 1.15, 1.45mm. Crimping function: bare terminal (0.5~2.0mm²) & connector terminal (0.3~1.25mm²). Engineer's joint-screw prevents joint from being loose and easy maintenance. Environment-friendly elastomer handles give soft-touch grip.

1/6

PA-06 (175mm)

PA-07 (175mm)

PA-14 (175mm)

CONNECTOR & PIN EXTRACTOR

PAS-30~34 

ENGINEER PAS-30
ENGINEER PAS-30

Connector Extractor (Spring Loaded Type) Perfect and simple work for extracting pin & socket contacts. Newly designed built-in spring, allows ejector pin to retract in the sleeve after work, preventing damage while not in use. Inner sleeve ⌀ 1.9mm & outer sleeve ⌀ 2.5mm.

ENGINEER PAS-31
ENGINEER PAS-31

Connector Extractor (Spring Loaded Type) Perfect and simple work for extracting pin & socket contacts. Newly designed built-in spring, allows ejector pin to retract in the sleeve after work, preventing damage while not in use. Inner sleeve ⌀ 2.1mm & outer sleeve ⌀ 2.7mm.

ENGINEER SS-30
ENGINEER SS-30

ENGINEER PAS-30
ENGINEER PAS-30

Connector Extractor (Spring Loaded Type) Perfect and simple work for extracting pin & socket contacts. Newly designed built-in spring, allows ejector pin to retract in the sleeve after work, preventing damage while not in use. Inner sleeve ⌀ 1.9mm & outer sleeve ⌀ 2.5mm.

1/13

SS-30~34

TERMINAL SET

PA-91~93 

ENGINEER PA-91
ENGINEER PA-91

Bare terminal set in compact plastic case.

ENGINEER PA-91
ENGINEER PA-91

ENGINEER PA-93
ENGINEER PA-93

ENGINEER PA-91
ENGINEER PA-91

Bare terminal set in compact plastic case.

1/6

PICK-UP & HOLDING TOOLS

PH-01~04

ENGINEER PH-01
ENGINEER PH-01

Straight edge lock holder (125mm) Serrated ratchet allows quick disconnect & reconnect for temporary connection. Ideal for assembling, soldering & precision clamping work. 3-position snap lock.

ENGINEER PH-02
ENGINEER PH-02

Curved edge lock holder (125mm) Serrated ratchet allows quick disconnect & reconnect for temporary connection. Ideal for assembling, soldering & precision clamping work. 3-position snap lock.

ENGINEER TP-36
ENGINEER TP-36

Magnetic Pick-up Tool TP-36 (525mm) Ideal for part retrieval in hard-to-reach areas. Flexible shaft conforms to any shape. Alnico magnet tip to pick up small magnetic parts in precision instruments easily.

ENGINEER PH-01
ENGINEER PH-01

Straight edge lock holder (125mm) Serrated ratchet allows quick disconnect & reconnect for temporary connection. Ideal for assembling, soldering & precision clamping work. 3-position snap lock.

1/9

SS-21~22

TP-33~34

TP-35~36